Перевод: с английского на все языки

со всех языков на английский

Proceedings of the Institution of Mechanical Engineers

  • 1 Guest, James John

    [br]
    b. 24 July 1866 Handsworth, Birmingham, England
    d. 11 June 1956 Virginia Water, Surrey, England
    [br]
    English mechanical engineer, engineering teacher and researcher.
    [br]
    James John Guest was educated at Marlborough in 1880–4 and at Trinity College, Cambridge, graduating as fifth wrangler in 1888. He received practical training in several workshops and spent two years in postgraduate work at the Engineering Department of Cambridge University. After working as a draughtsman in the machine-tool, hydraulic and crane departments of Tangyes Ltd at Birmingham, he was appointed in 1896 Assistant Professor of Engineering at McGill University in Canada. After a short time he moved to the Polytechnic Institute at Worcester, Massachusetts, where he was for three years Professor of Mechanical Engineering and Head of the Engineering Department. In 1899 he returned to Britain and set up as a consulting engineer in Birmingham, being a partner in James J.Guest \& Co. For the next fifteen years he combined this work with research on grinding phenomena. He also developed a theory of grinding which he first published in a paper at the British Association for the Advancement of Science in 1914 and elaborated in a paper to the Institution of Mechanical Engineers and in his book Grinding Machinery (1915). During the First World War, in 1916–17, he was in charge of inspection in the Staffordshire and Shropshire Area, Ministry of Munitions. In 1917 he returned to teaching as Reader in Graphics and Structural Engineering at University College London. His final appointment was about 1923 as Professor of Mechanical and Electrical Engineering, Artillery College, Woolwich, which later became the Military College of Science.
    He carried out research on the strength of materials and contributed many articles on the subject to the technical press. He originated Guest's Law for a criterion of failure of materials under combined stresses, first published in 1900. He was a Member of the Institution of Mechanical Engineers in 1900–6 and from 1919 and contributed to their proceedings in many discussions and two major papers.
    [br]
    Bibliography
    Of many publications by Guest, the most important are: 1900, "Ductile materials under combined stress", Proceedings of the Physical Society 17:202.
    1915, Grinding Machinery, London.
    1915, "Theory of grinding, with reference to the selection of speeds in plain and internal work", Proceedings of the Institution of Mechanical Engineers 89:543.
    1917. "Torsional hysteresis of mild steel", Proceedings of the Royal Society A93:313.
    1918. with F.C.Lea, "Curved beams", Proceedings of the Royal Society A95:1. 1930, "Effects of rapidly acting stress", Proceedings of the Institution of Mechanical
    Engineers 119:1,273.
    RTS

    Biographical history of technology > Guest, James John

  • 2 Herbert, Edward Geisler

    [br]
    b. 23 March 1869 Dedham, near Colchester, Essex, England
    d. 9 February 1938 West Didsbury, Manchester, England
    [br]
    English engineer, inventor of the Rapidor saw and the Pendulum Hardness Tester, and pioneer of cutting tool research.
    [br]
    Edward Geisler Herbert was educated at Nottingham High School in 1876–87, and at University College, London, in 1887–90, graduating with a BSc in Physics in 1889 and remaining for a further year to take an engineering course. He began his career as a premium apprentice at the Nottingham works of Messrs James Hill \& Co, manufacturers of lace machinery. In 1892 he became a partner with Charles Richardson in the firm of Richardson \& Herbert, electrical engineers in Manchester, and when this partnership was dissolved in 1895 he carried on the business in his own name and began to produce machine tools. He remained as Managing Director of this firm, reconstituted in 1902 as a limited liability company styled Edward G.Herbert Ltd, until his retirement in 1928. He was joined by Charles Fletcher (1868–1930), who as joint Managing Director contributed greatly to the commercial success of the firm, which specialized in the manufacture of small machine tools and testing machinery.
    Around 1900 Herbert had discovered that hacksaw machines cut very much quicker when only a few teeth are in operation, and in 1902 he patented a machine which utilized this concept by automatically changing the angle of incidence of the blade as cutting proceeded. These saws were commercially successful, but by 1912, when his original patents were approaching expiry, Herbert and Fletcher began to develop improved methods of applying the rapid-saw concept. From this work the well-known Rapidor and Manchester saws emerged soon after the First World War. A file-testing machine invented by Herbert before the war made an autographic record of the life and performance of the file and brought him into close contact with the file and tool steel manufacturers of Sheffield. A tool-steel testing machine, working like a lathe, was introduced when high-speed steel had just come into general use, and Herbert became a prominent member of the Cutting Tools Research Committee of the Institution of Mechanical Engineers in 1919, carrying out many investigations for that body and compiling four of its Reports published between 1927 and 1933. He was the first to conceive the idea of the "tool-work" thermocouple which allowed cutting tool temperatures to be accurately measured. For this advance he was awarded the Thomas Hawksley Gold Medal of the Institution in 1926.
    His best-known invention was the Pendulum Hardness Tester, introduced in 1923. This used a spherical indentor, which was rolled over, rather than being pushed into, the surface being examined, by a small, heavy, inverted pendulum. The period of oscillation of this pendulum provided a sensitive measurement of the specimen's hardness. Following this work Herbert introduced his "Cloudburst" surface hardening process, in which hardened steel engineering components were bombarded by steel balls moving at random in all directions at very high velocities like gaseous molecules. This treatment superhardened the surface of the components, improved their resistance to abrasion, and revealed any surface defects. After bombardment the hardness of the superficially hardened layers increased slowly and spontaneously by a room-temperature ageing process. After his retirement in 1928 Herbert devoted himself to a detailed study of the influence of intense magnetic fields on the hardening of steels.
    Herbert was a member of several learned societies, including the Manchester Association of Engineers, the Institute of Metals, the American Society of Mechanical Engineers and the Institution of Mechanical Engineers. He retained a seat on the Board of his company from his retirement until the end of his life.
    [br]
    Principal Honours and Distinctions
    Manchester Association of Engineers Butterworth Gold Medal 1923. Institution of Mechanical Engineers Thomas Hawksley Gold Medal 1926.
    Bibliography
    E.G.Herbert obtained several British and American patents and was the author of many papers, which are listed in T.M.Herbert (ed.), 1939, "The inventions of Edward Geisler Herbert: an autobiographical note", Proceedings of the Institution of Mechanical Engineers 141: 59–67.
    ASD / RTS

    Biographical history of technology > Herbert, Edward Geisler

  • 3 Williams, Sir Frederic Calland

    [br]
    b. 26 June 1911 Stockport, Cheshire, England
    d. 11 August 1977 Prestbury, Cheshire, England
    [br]
    English electrical engineer who invented the Williams storage cathode ray tube, which was extensively used worldwide as a data memory in the first digital computers.
    [br]
    Following education at Stockport Grammar School, Williams entered Manchester University in 1929, gaining his BSc in 1932 and MSc in 1933. After a short time as a college apprentice with Metropolitan Vickers, he went to Magdalen College, Oxford, to study for a DPhil, which he was awarded in 1936. He returned to Manchester University that year as an assistant lecturer, gaining his DSc in 1939. Following the outbreak of the Second World War he worked for the Scientific Civil Service, initially at the Bawdsey Research Station and then at the Telecommunications Research Establishment at Malvern, Worcestershire. There he was involved in research on non-incandescent amplifiers and diode rectifiers and the development of the first practical radar system capable of identifying friendly aircraft. Later in the war, he devised an automatic radar system suitable for use by fighter aircraft.
    After the war he resumed his academic career at Manchester, becoming Professor of Electrical Engineering and Director of the University Electrotechnical Laboratory in 1946. In the same year he succeeded in developing a data-memory device based on the cathode ray tube, in which the information was stored and read by electron-beam scanning of a charge-retaining target. The Williams storage tube, as it became known, not only found obvious later use as a means of storing single-frame, still television images but proved to be a vital component of the pioneering Manchester University MkI digital computer. Because it enabled both data and program instructions to be stored in the computer, it was soon used worldwide in the development of the early stored-program computers.
    [br]
    Principal Honours and Distinctions
    Knighted 1976. OBE 1945. CBE 1961. FRS 1950. Hon. DSc Durham 1964, Sussex 1971, Wales 1971. First Royal Society of Arts Benjamin Franklin Medal 1957. City of Philadelphia John Scott Award 1960. Royal Society Hughes Medal 1963. Institution of Electrical Engineers Faraday Medal 1972. Institute of Electrical and Electronics Engineers Pioneer Award 1973.
    Bibliography
    Williams contributed papers to many scientific journals, including Proceedings of the Royal Society, Proceedings of the Cambridge Philosophical Society, Journal of the Institution of Electrical Engineers, Proceedings of the Institution of Mechanical Engineers, Wireless Engineer, Post Office Electrical Engineers' Journal. Note especially: 1948, with J.Kilburn, "Electronic digital computers", Nature 162:487; 1949, with J.Kilburn, "A storage system for use with binary digital computing machines", Proceedings of the Institution of Electrical Engineers 96:81; 1975, "Early computers at Manchester University", Radio \& Electronic Engineer 45:327. Williams also collaborated in the writing of vols 19 and 20 of the MIT Radiation
    Laboratory Series.
    Further Reading
    B.Randell, 1973, The Origins of Digital Computers, Berlin: Springer-Verlag. M.R.Williams, 1985, A History of Computing Technology, London: Prentice-Hall. See also: Stibitz, George R.; Strachey, Christopher.
    KF

    Biographical history of technology > Williams, Sir Frederic Calland

  • 4 Buckle, William

    [br]
    b. 29 July 1794 Alnwick, Northumberland, England
    d. 30 September 1863 London, England
    [br]
    English mechanical engineer who introduced the first large screw-cutting lathe to Boulton, Watt \& Co.
    [br]
    William Buckle was the son of Thomas Buckle (1759–1849), a millwright who later assisted the 9th Earl of Dundonald (1749–1831) in his various inventions, principally machines for the manufacture of rope. Soon after the birth of William, the family moved from Alnwick to Hull, Yorkshire, where he received his education. The family again moved c.1808 to London, and William was apprenticed to Messrs Woolf \& Edwards, millwrights and engineers of Lambeth. During his apprenticeship he attended evening classes at a mechanical drawing school in Finsbury, which was then the only place of its kind in London.
    After completing his apprenticeship, he was sent by Messrs Humphrys to Memel in Prussia to establish steamboats on the rivers and lakes there under the patronage of the Prince of Hardenburg. After about four years he returned to Britain and was employed by Boulton, Watt \& Co. to install the engines in the first steam mail packet for the service between Dublin and Holyhead. He was responsible for the engines of the steamship Lightning when it was used on the visit of George IV to Ireland.
    About 1824 Buckle was engaged by Boulton, Watt \& Co. as Manager of the Soho Foundry, where he is credited with introducing the first large screw-cutting lathe. At Soho about 700 or 800 men were employed on a wide variety of engineering manufacture, including coining machinery for mints in many parts of the world, with some in 1826 for the Mint at the Soho Manufactory. In 1851, following the recommendations of a Royal Commission, the Royal Mint in London was reorganized and Buckle was asked to take the post of Assistant Coiner, the senior executive officer under the Deputy Master. This he accepted, retaining the post until the end of his life.
    At Soho, Buckle helped to establish a literary and scientific institution to provide evening classes for the apprentices and took part in the teaching. He was an original member of the Institution of Mechanical Engineers, which was founded in Birmingham in January 1847, and a member of their Council from then until 1855. He contributed a number of papers in the early years, including a memoir of William Murdock whom he had known at Soho; he resigned from the Institution in 1856 after his move to London. He was an honorary member of the London Association of Foreman Engineers.
    [br]
    Bibliography
    1850, "Inventions and life of William Murdock", Proceedings of the Institution of Mechanical Engineers 2 (October): 16–26.
    RTS

    Biographical history of technology > Buckle, William

  • 5 Fox, Samson

    [br]
    b. 11 July 1838 Bowling, near Bradford, Yorkshire, England
    d. 24 October 1903 Walsall, Staffordshire, England
    [br]
    English engineer who invented the corrugated boiler furnace.
    [br]
    He was the son of a cloth mill worker in Leeds and at the age of 10 he joined his father at the mill. Showing a mechanical inclination, he was apprenticed to a firm of machine-tool makers, Smith, Beacock and Tannett. There he rose to become Foreman and Traveller, and designed and patented tools for cutting bevelled gears. With his brother and one Refitt, he set up the Silver Cross engineering works for making special machine tools. In 1874 he founded the Leeds Forge Company, acting as Managing Director until 1896 and then as Chairman until shortly before his death.
    It was in 1877 that he patented his most important invention, the corrugated furnace for steam-boilers. These furnaces could withstand much higher pressures than the conventional form, and higher working pressures in marine boilers enabled triple-expansion engines to be installed, greatly improving the performance of steamships, and the outcome was the great ocean-going liners of the twentieth century. The first vessel to be equipped with the corrugated furnace was the Pretoria of 1878. At first the furnaces were made by hammering iron plates using swage blocks under a steam hammer. A plant for rolling corrugated plates was set up at Essen in Germany, and Fox installed a similar mill at his works in Leeds in 1882.
    In 1886 Fox installed a Siemens steelmaking plant and he was notable in the movement for replacing wrought iron with steel. He took out several patents for making pressed-steel underframes for railway wagons. The business prospered and Fox opened a works near Chicago in the USA, where in addition to wagon underframes he manufactured the first American pressed-steel carriages. He later added a works at Pittsburgh.
    Fox was the first in England to use water gas for his metallurgical operations and for lighting, with a saving in cost as it was cheaper than coal gas. He was also a pioneer in the acetylene industry, producing in 1894 the first calcium carbide, from which the gas is made.
    Fox took an active part in public life in and around Leeds, being thrice elected Mayor of Harrogate. As a music lover, he was a benefactor of musicians, contributing no less than £45,000 towards the cost of building the Royal College of Music in London, opened in 1894. In 1897 he sued for libel the author Jerome K.Jerome and the publishers of the Today magazine for accusing him of misusing his great generosity to the College to give a misleading impression of his commercial methods and prosperity. He won the case but was not awarded costs.
    [br]
    Principal Honours and Distinctions
    Royal Society of Arts James Watt Silver Medal and Howard Gold Medal. Légion d'honneur 1889.
    Bibliography
    1877, British Patent nos. 1097 and 2530 (the corrugated furnace or "flue", as it was often called).
    Further Reading
    Obituary, 1903, Proceedings of the Institution of Mechanical Engineers: 919–21.
    Obituary, 1903, Proceedings of the Institution of Civil Engineers (the fullest of the many obituary notices).
    G.A.Newby, 1993, "Behind the fire doors: Fox's corrugated furnace 1877 and the high pressure steamship", Transactions of the Newcomen Society 64.
    LRD

    Biographical history of technology > Fox, Samson

  • 6 Priestman, William Dent

    [br]
    b. 23 August 1847 Sutton, Hull, England
    d. 7 September 1936 Hull, England
    [br]
    English oil engine pioneer.
    [br]
    William was the second son and one of eleven children of Samuel Priestman, who had moved to Hull after retiring as a corn miller in Kirkstall, Leeds, and who in retirement had become a director of the North Eastern Railway Company. The family were strict Quakers, so William was sent to the Quaker School in Bootham, York. He left school at the age of 17 to start an engineering apprenticeship at the Humber Iron Works, but this company failed so the apprenticeship was continued with the North Eastern Railway, Gateshead. In 1869 he joined the hydraulics department of Sir William Armstrong \& Company, Newcastle upon Tyne, but after a year there his father financed him in business at a small, run down works, the Holderness Foundry, Hull. He was soon joined by his brother, Samuel, their main business being the manufacture of dredging equipment (grabs), cranes and winches. In the late 1870s William became interested in internal combustion engines. He took a sublicence to manufacture petrol engines to the patents of Eugène Etève of Paris from the British licensees, Moll and Dando. These engines operated in a similar manner to the non-compression gas engines of Lenoir. Failure to make the two-stroke version of this engine work satisfactorily forced him to pay royalties to Crossley Bros, the British licensees of the Otto four-stroke patents.
    Fear of the dangers of petrol as a fuel, reflected by the associated very high insurance premiums, led William to experiment with the use of lamp oil as an engine fuel. His first of many patents was for a vaporizer. This was in 1885, well before Ackroyd Stuart. What distinguished the Priestman engine was the provision of an air pump which pressurized the fuel tank, outlets at the top and bottom of which led to a fuel atomizer injecting continuously into a vaporizing chamber heated by the exhaust gases. A spring-loaded inlet valve connected the chamber to the atmosphere, with the inlet valve proper between the chamber and the working cylinder being camoperated. A plug valve in the fuel line and a butterfly valve at the inlet to the chamber were operated, via a linkage, by the speed governor; this is believed to be the first use of this method of control. It was found that vaporization was only partly achieved, the higher fractions of the fuel condensing on the cylinder walls. A virtue was made of this as it provided vital lubrication. A starting system had to be provided, this comprising a lamp for preheating the vaporizing chamber and a hand pump for pressurizing the fuel tank.
    Engines of 2–10 hp (1.5–7.5 kW) were exhibited to the press in 1886; of these, a vertical engine was installed in a tram car and one of the horizontals in a motor dray. In 1888, engines were shown publicly at the Royal Agricultural Show, while in 1890 two-cylinder vertical marine engines were introduced in sizes from 2 to 10 hp (1.5–7.5 kW), and later double-acting ones up to some 60 hp (45 kW). First, clutch and gearbox reversing was used, but reversing propellers were fitted later (Priestman patent of 1892). In the same year a factory was established in Philadelphia, USA, where engines in the range 5–20 hp (3.7–15 kW) were made. Construction was radically different from that of the previous ones, the bosses of the twin flywheels acting as crank discs with the main bearings on the outside.
    On independent test in 1892, a Priestman engine achieved a full-load brake thermal efficiency of some 14 per cent, a very creditable figure for a compression ratio limited to under 3:1 by detonation problems. However, efficiency at low loads fell off seriously owing to the throttle governing, and the engines were heavy, complex and expensive compared with the competition.
    Decline in sales of dredging equipment and bad debts forced the firm into insolvency in 1895 and receivers took over. A new company was formed, the brothers being excluded. However, they were able to attend board meetings, but to exert no influence. Engine activities ceased in about 1904 after over 1,000 engines had been made. It is probable that the Quaker ethics of the brothers were out of place in a business that was becoming increasingly cut-throat. William spent the rest of his long life serving others.
    [br]
    Further Reading
    C.Lyle Cummins, 1976, Internal Fire, Carnot Press.
    C.Lyle Cummins and J.D.Priestman, 1985, "William Dent Priestman, oil engine pioneer and inventor: his engine patents 1885–1901", Proceedings of the Institution of
    Mechanical Engineers 199:133.
    Anthony Harcombe, 1977, "Priestman's oil engine", Stationary Engine Magazine 42 (August).
    JB

    Biographical history of technology > Priestman, William Dent

  • 7 Brinell, Johann August

    SUBJECT AREA: Metallurgy
    [br]
    b. 1849 Småland, Sweden
    d. 17 November 1925 Stockholm, Sweden
    [br]
    Swedish metallurgist, inventor of the well-known method of hardness measurement which uses a steel-ball indenter.
    [br]
    Brinell graduated as an engineer from Boräs Technical School, and his interest in metallurgy began to develop in 1875 when he became an engineer at the ironworks of Lesjöfors and came under the influence of Gustaf Ekman. In 1882 he was appointed Chief Engineer at the Fagersta Ironworks, where he became one of Sweden's leading experts in the manufacture and heat treatment of tool steels.
    His reputation in this field was established in 1885 when he published a paper on the structural changes which occurred in steels when they were heated and cooled, and he was among the first to recognize and define the critical points of steel and their importance in heat treatment. Some of these preliminary findings were first exhibited at Stockholm in 1897. His exhibit at the World Exhibition at Paris in 1900 was far more detailed and there he displayed for the first time his method of hardness determination using a steel-ball indenter. For these contributions he was awarded the French Grand Prix and also the Polhem Prize of the Swedish Technical Society.
    He was later concerned with evaluating and developing the iron-ore deposits of north Sweden and was one of the pioneers of the electric blast-furnace. In 1903 he became Chief Engineer of the Jernkontoret and remained there until 1914. In this capacity and as Editor of the Jernkontorets Annaler he made significant contributions to Swedish metallurgy. His pioneer work on abrasion resistance, undertaken long before the term tribology had been invented, gained him the Rinman Medal, awarded by the Jernkontoret in 1920.
    [br]
    Principal Honours and Distinctions
    Member of the Swedish Academy of Science 1902. Dr Honoris Causa, University of Upsala 1907. French Grand Prix, Paris World Exhibition 1900; Swedish Technical Society Polhem Prize 1900; Iron and Steel Institute Bessemer Medal 1907; Jernkontorets Rinman Medal 1920.
    Further Reading
    Axel Wahlberg, 1901, Journal of the Iron and Steel Institute 59:243 (the first English-language description of the Brinell Hardness Test).
    Machinery's Encyclopedia, 1917, Vol. III, New York: Industrial Press, pp. 527–40 (a very readable account of the Brinell test in relation to the other hardness tests available at the beginning of the twentieth century).
    Hardness Test Research Committee, 1916, Bibliography on hardness testing, Proceedings of the Institution of Mechanical Engineers.
    ASD

    Biographical history of technology > Brinell, Johann August

  • 8 Greathead, James Henry

    [br]
    b. 6 August 1844 Grahamstown, Cape Colony (now South Africa)
    d. 21 October 1896 Streatham, London, England
    [br]
    British civil engineer, inventor of the Greathead tunnelling shield.
    [br]
    Greathead came to England in 1859 to complete his education. In 1864 he began a three-year pupillage with the civil engineer Peter W. Barlow, after which he was engaged as an assistant engineer on the extension of the Midland Railway from Bedford to London. In 1869 he was entrusted with the construction of the Tower Subway under the River Thames; this was carried out using a cylindrical wrought-iron shield which was forced forward by six large screws as material was excavated in front of it. This work was completed the same year. In 1870 he set himself up as a consulting engineer, and from 1873 he was Resident Engineer on the Hammersmith and Richmond extensions of the Metropolitan District Railway. He assisted in the preparation of several other railway projects including the Regent's Canal Railway in 1880, the Dagenham Dock and the Metropolitan Outer Circle Railways in 1881, a new line from London to Eastbourne and a number of Irish light railways. He worked on a bill for the City and South London Railway, which was built between 1886 and 1890; here compressed air was used to prevent the inrush of water, a method for tunnelling which was generally adopted from then on. He invented apparatus for the application of water to excavate in front of the shield as well as for injecting cement-grout behind the lining of the tunnel.
    He was joint engineer with Sir Douglas Fox for the construction of the Liverpool Overhead Railway, and held the same post with W.R.Galbraith on the Waterloo and City Railway; he was also associated with Sir John Fowler and Sir Benjamin Baker in the construction of the Central London Railway. He died, aged 52, before the completion of some of these projects.
    [br]
    Further Reading
    Obituary, 1896, Proceedings of the Institution of Mechanical Engineers.
    O.Green, 1987, The London Underground: An Illustrated History', London: Ian Allan (in association with the London Transport Museum).
    P.P.Holman, 1990, The Amazing Electric Tube: A History of the City and South London
    Railway, London: London Transport Museum.
    IMcN

    Biographical history of technology > Greathead, James Henry

  • 9 Hornby, Frank

    [br]
    b. 15 May 1863 Liverpool, England
    d. 21 September 1936 Liverpool, England
    [br]
    English toy manufacturer and inventor of Meccano kits.
    [br]
    Frank Hornby left school at the age of 16 and worked as a clerk, at first for his father, a provision merchant, and later for D.H.Elliott, an importer of meat and livestock, for whom he became Managing Clerk. As a youth he was interested in engineering and in his own small workshop he became a skilled amateur mechanic. He made toys for his children and c.1900 he devised a constructional toy kit consisting of perforated metal strips which could be connected by bolts and nuts. He filed a patent application in January 1901 and, having failed to interest established toy manufacturers, he set up a small business in partnership with his employer, D.H. Elliott, who provided financial support. The kits were sold at first under the name of Mechanics Made Easy, but by 1907 the name Meccano had been registered as a trade mark. The business expanded rapidly and in 1908 Elliott withdrew from the partnership and Hornby continued on his own account, the company being incorporated as Meccano Ltd. Although parts for Meccano were produced at first by various manufacturers, Hornby soon acquired premises to produce all the components under his own control, and between 1910 and 1913 he established his own factory on a 5-acre (2-hectare) site at Binn's Road, Liverpool. The Meccano Magazine, a monthly publication with articles of general engineering interest, developed from a newsletter giving advice on the use of Meccano, and from the first issue in 1916 until 1924 was edited by Frank Hornby. In 1920 he introduced the clockwork Hornby trains, followed by the electric version five years later. These were gauge "0" (1 1/4 in./32 mm); the smaller gauge "00", or Hornby Dublo, was a later development. Another product of Meccano Ltd was the series of model vehicles known as Dinky toys, introduced in 1934.
    Frank Hornby served as a Member of Parliament for the Everton Division of Liverpool from 1931 to 1935.
    [br]
    Principal Honours and Distinctions
    MP, 1931–5.
    Further Reading
    D.J.Jeremy (ed.), 1984–6, Dictionary of Business Biography, Vol. 3, London, 345–9 (a useful biography).
    Proceedings of the Institution of Mechanical Engineers 127(1934):140–1 (describes the Binn's Road factory).
    RTS

    Biographical history of technology > Hornby, Frank

  • 10 Mannesmann, Reinhard

    SUBJECT AREA: Metallurgy
    [br]
    b. 13 May 1856 Remscheid, Bleidinghausen, Germany
    d. 22 February 1922 Remscheid, Bleidinghausen, Germany
    [br]
    German metallurgical engineer.
    [br]
    Reinhard Mannesmann and his four brothers developed the engineering works at Remscheid that had been founded by their father. With his brother Max, Reinhard devised c. 1885 a method of producing seamless tubes by a rolling process. Factories for manufacturing tubes by this process were established at Remscheid, at Bous in the Saar district and at Komotau in Bohemia. Further developments of the process were patented by the brothers in the years following the initial patent of 1885. The British patent rights for the Mannesmann process were purchased by the Landore Siemens Steel Company in 1888, and the Mannesmann Tube Company was established at Landore in South Wales. This company went into liquidation in 1899 after ten years of production and the Tube Works was then purchased by the Mannesmann family, and a new company, the British Mannesmann Tube Company, was formed. Reinhard and Max Mannesmann took up residence near the Landore works and the business prospered so that by 1914 Landore was employing 1,500 men and producing 35,000 tons of tubing each year. The company was taken over during the First World War by the Custodian of Enemy Property, and after the war a new tube works which had been planned in 1914 was built at Newport, Monmouthshire. The Mannesmann family were able to resume control in 1926 for some ten years, but in 1938 the company became part of the Stewarts \& Lloyds organization.
    [br]
    Further Reading
    G.Evans, 1934, Manufacture of Seamless Tubes Ferrous and Non-Ferrous, London; 1940, Proceedings of the Institution of Mechanical Engineers 143:62–3 (both provide technical details of the Mannesmann process for forming seamless tubes).
    RTS

    Biographical history of technology > Mannesmann, Reinhard

  • 11 Bodmer, Johann Georg

    [br]
    b. 9 December 1786 Zurich, Switzerland
    d. 30 May 1864 Zurich, Switzerland
    [br]
    Swiss mechanical engineer and inventor.
    [br]
    John George Bodmer (as he was known in England) showed signs of great inventive ability even as a child. Soon after completing his apprenticeship to a local millwright, he set up his own work-shop at Zussnacht. One of his first inventions, in 1805, was a shell which exploded on impact. Soon after this he went into partnership with Baron d'Eichthal to establish a cotton mill at St Blaise in the Black Forest. Bodmer designed the water-wheels and all the machinery. A few years later they established a factory for firearms and Bodmer designed special machine tools and developed a system of interchangeable manufacture comparable with American developments at that time. More inventions followed, including a detachable bayonet for breech-loading rifles and a rifled, breech-loading cannon for 12 lb (5.4 kg) shells.
    Bodmer was appointed by the Grand Duke of Baden to the posts of Director General of the Government Iron Works and Inspector of Artillery. He left St Blaise in 1816 and entered completely into the service of the Grand Duke, but before taking up his duties he visited Britain for the first time and made an intensive five-month tour of textile mills, iron works, workshops and similar establishments.
    In 1821 he returned to Switzerland and was engaged in setting up cotton mills and other engineering works. In 1824 he went back to England, where he obtained a patent for his improvements in cotton machinery and set up a mill near Bolton incorporating his ideas. His health failing, he was obliged to return to Switzerland in 1828, but he was soon busy with engineering works there and in France. In 1833 he went to England again, first to Bolton and four years later to Manchester in partnership with H.H.Birley. In the next ten years he patented many more inventions in the fields of textile machinery, steam engines and machine tools. These included a balanced steam engine, a mechanical stoker, steam engine valve gear, gear-cutting machines and a circular planer or vertical lathe, anticipating machines of this type later developed in America by E.P. Bullard. The metric system was used in his workshops and in gearing calculations he introduced the concept of diametral pitch, which then became known as "Manchester Pitch". The balanced engine was built in stationary form and in two locomotives, but although their running was remarkably smooth the additional complication prevented their wider use.
    After the death of H.H.Birley in 1846, Bodmer removed to London until 1848, when he went to Austria. About 1860 he returned to his native town of Zurich. He remained actively engaged in all kinds of inventions up to the end of his life. He obtained fourteen British patents, each of which describes many inventions; two of these patents were extended beyond the normal duration of fourteen years. Two others were obtained on his behalf, one by his brother James in 1813 for his cannon and one relating to railways by Charles Fox in 1847. Many of his inventions had little direct influence but anticipated much later developments. His ideas were sound and some of his engines and machine tools were in use for over sixty years. He was elected a Member of the Institution of Civil Engineers in 1835.
    [br]
    Bibliography
    1845, "The advantages of working stationary and marine engines with high-pressure steam, expansively and at great velocities; and of the compensating, or double crank system", Minutes of the Proceedings of the Institution of Civil Engineers 4:372–99.
    1846, "On the combustion of fuel in furnaces and steam-boilers, with a description of Bodmer's fire-grate", Minutes of the Proceedings of the Institution of Civil Engineers 5:362–8.
    Further Reading
    H.W.Dickinson, 1929–30, "Diary of John George Bodmer, 1816–17", Transactions of the Newcomen Society 10:102–14.
    D.Brownlie, 1925–6, John George Bodmer, his life and work, particularly in relation to the evolution of mechanical stoking', Transactions of the Newcomen Society 6:86–110.
    W.O.Henderson (ed.), 1968, Industrial Britain Under the Regency: The Diaries of Escher, Bodmer, May and de Gallois 1814–1818, London: Frank Cass (a more complete account of his visit to Britain).
    RTS

    Biographical history of technology > Bodmer, Johann Georg

  • 12 Kennedy, Sir Alexander Blackie William

    SUBJECT AREA: Ports and shipping
    [br]
    b. 17 March 1847 Stepney, London, England d. 1928
    [br]
    English marine engineer and educator.
    [br]
    Sir Alexander Kennedy was trained as a marine engineer. The son of a Congregational minister, he was educated at the City of London School and the School of Mines, Jermyn Street. He was then apprenticed to J. \& W.Dudgeon of Millwall, marine engineers, and went on to become a draughtsman to Sir Charles Marsh Palmer of Jarrow (with whom he took part in the development of the compound steam-engine for marine use) and T.M.Tennant \& Co. of Leith. In 1874 he was appointed Professor of Engineering at University College, London. He built up an influential School of Engineering, being the first in England to integrate laboratory work as a regular feature of instruction. The engineering laboratory that he established in 1878 has been described as "the first of its kind in England" (Proceedings of the Institution of Civil Engineers). He and his students conducted important experiments on the strength and elasticity of materials, boiler testing and related subjects. He followed the teaching of Franz Reuleaux, whose Kinematics of Machinery he translated from the German.
    While thus breaking new educational ground at University College, Kennedy concurrently established a very thriving private practice as a consulting engineer in partnership with Bernard Maxwell Jenkin (the son of Fleeming Jenkin), to pursue which he relinquished his academic posts in 1889. He planned and installed the whole electricity system for the Westminster Electric Supply Corporation, and other electricity companies. He was also heavily involved in the development of electrically powered transport systems. During the First World War he served on a panel of the Munitions Invention Department, and after the war he undertook to record photographically the scenes of desolation in his book From Ypres to Verdun (1921). Towards the end of his life, he pursued his interest in archaeology with the exploration of Petra, recorded in a monograph: Petra. Its History and Monuments (1925). He also joined the Institution of Mechanical Engineers in 1879, becoming the President of that body in 1894, and he joined the Institution of Electrical Engineers in 1890. Kennedy was thus something of an engineering polymath, as well as being an outstanding engineering educationalist.
    [br]
    Principal Honours and Distinctions
    FRS 1887. Knighted 1905. Member, Institution of Civil Engineers 1879; President, 1906. President, Institution of Mechanical Engineers 1894.
    Bibliography
    1921, From Ypresto Verdum.
    1925, Petra. Its History and Monuments.
    Further Reading
    DNB supplement.
    AB

    Biographical history of technology > Kennedy, Sir Alexander Blackie William

  • 13 Rankine, William John Macquorn

    [br]
    b. 5 July 1820 Edinburgh, Scotland
    d. 1872
    [br]
    [br]
    Rankine was educated at Ayr Academy and Glasgow High School, although he appears to have learned much of his basic mathematics and physics through private study. He attended Edinburgh University and then assisted his father, who was acting as Superintendent of the Edinburgh and Dalkeith Railway. This introduction to engineering practice was followed in 1838 by his appointment as a pupil to Sir John MacNeill, and for the next four years he served under MacNeill on his Irish railway projects. While still in his early twenties, Rankine presented pioneering papers on metal fatigue and other subjects to the Institution of Civil Engineers, for which he won a prize, but he appears to have resigned from the Civils in 1857 after an argument because the Institution would not transfer his Associate Membership into full Membership. From 1844 to 1848 Rankine worked on various projects for the Caledonian Railway Company, but his interests were becoming increasingly theoretical and a series of distinguished papers for learned societies established his reputation as a leading scholar in the new science of thermodynamics. He was elected Fellow of the Royal Society in 1853. At the same time, he remained intimately involved with practical questions of applied science, in shipbuilding, marine engineering and electric telegraphy, becoming associated with the influential coterie of fellow Scots such as the Thomson brothers, Napier, Elder, and Lewis Gordon. Gordon was then the head of a large and successful engineering practice, but he was also Regius Professor of Engineering at the University of Glasgow, and when he retired from the Chair to pursue his business interests, Rankine, who had become his Assistant, was appointed in his place.
    From 1855 until his premature death in 1872, Rankine built up an impressive engineering department, providing a firm theoretical basis with a series of text books that he wrote himself and most of which remained in print for many decades. Despite his quarrel with the Institution of Civil Engineers, Rankine took a keen interest in the institutional development of the engineering profession, becoming the first President of the Institution of Engineers and Shipbuilders in Scotland, which he helped to establish in 1857. Rankine campaigned vigorously for the recognition of engineering studies as a full university degree at Glasgow, and he achieved this in 1872, the year of his death. Rankine was one of the handful of mid-nineteenth century engineers who virtually created engineering as an academic discipline.
    [br]
    Principal Honours and Distinctions
    FRS 1853. First President, Institution of Engineers and Shipbuilders in Scotland, 1857.
    Bibliography
    1858, Manual of Applied Mechanics.
    1859, Manual of the Steam Engine and Other Prime Movers.
    1862, Manual of Civil Engineering.
    1869, Manual of Machinery and Millwork.
    Further Reading
    J.Small, 1957, "The institution's first president", Proceedings of the Institution of Engineers and Shipbuilders in Scotland: 687–97.
    H.B.Sutherland, 1972, Rankine. His Life and Times.
    AB

    Biographical history of technology > Rankine, William John Macquorn

  • 14 Adamson, Daniel

    [br]
    b. 1818 Shildon, Co. Durham, England
    d. January 1890 Didsbury, Manchester, England
    [br]
    English mechanical engineer, pioneer in the use of steel for boilers, which enabled higher pressures to be introduced; pioneer in the use of triple-and quadruple-expansion mill engines.
    [br]
    Adamson was apprenticed between 1835 and 1841 to Timothy Hackworth, then Locomotive Superintendent on the Stockton \& Darlington Railway. After this he was appointed Draughtsman, then Superintendent Engineer, at that railway's locomotive works until in 1847 he became Manager of Shildon Works. In 1850 he resigned and moved to act as General Manager of Heaton Foundry, Stockport. In the following year he commenced business on his own at Newton Moor Iron Works near Manchester, where he built up his business as an iron-founder and boilermaker. By 1872 this works had become too small and he moved to a 4 acre (1.6 hectare) site at Hyde Junction, Dukinfield. There he employed 600 men making steel boilers, heavy machinery including mill engines fitted with the American Wheelock valve gear, hydraulic plant and general millwrighting. His success was based on his early recognition of the importance of using high-pressure steam and steel instead of wrought iron. In 1852 he patented his type of flanged seam for the firetubes of Lancashire boilers, which prevented these tubes cracking through expansion. In 1862 he patented the fabrication of boilers by drilling rivet holes instead of punching them and also by drilling the holes through two plates held together in their assembly positions. He had started to use steel for some boilers he made for railway locomotives in 1857, and in 1860, only four years after Bessemer's patent, he built six mill engine boilers from steel for Platt Bros, Oldham. He solved the problems of using this new material, and by his death had made c.2,800 steel boilers with pressures up to 250 psi (17.6 kg/cm2).
    He was a pioneer in the general introduction of steel and in 1863–4 was a partner in establishing the Yorkshire Iron and Steel Works at Penistone. This was the first works to depend entirely upon Bessemer steel for engineering purposes and was later sold at a large profit to Charles Cammell \& Co., Sheffield. When he started this works, he also patented improvements both to the Bessemer converters and to the engines which provided their blast. In 1870 he helped to turn Lincolnshire into an important ironmaking area by erecting the North Lincolnshire Ironworks. He was also a shareholder in ironworks in South Wales and Cumberland.
    He contributed to the development of the stationary steam engine, for as early as 1855 he built one to run with a pressure of 150 psi (10.5 kg/cm) that worked quite satisfactorily. He reheated the steam between the cylinders of compound engines and then in 1861–2 patented a triple-expansion engine, followed in 1873 by a quadruple-expansion one to further economize steam. In 1858 he developed improved machinery for testing tensile strength and compressive resistance of materials, and in the same year patents for hydraulic lifting jacks and riveting machines were obtained.
    He was a founding member of the Iron and Steel Institute and became its President in 1888 when it visited Manchester. The previous year he had been President of the Institution of Civil Engineers when he was presented with the Bessemer Gold Medal. He was a constant contributor at the meetings of these associations as well as those of the Institution of Mechanical Engineers. He did not live to see the opening of one of his final achievements, the Manchester Ship Canal. He was the one man who, by his indomitable energy and skill at public speaking, roused the enthusiasm of the people in Manchester for this project and he made it a really practical proposition in the face of strong opposition.
    [br]
    Principal Honours and Distinctions
    President, Institution of Civil Engineers 1887.
    President, Iron and Steel Institute 1888. Institution of Civil Engineers Bessemer Gold Medal 1887.
    Further Reading
    Obituary, Engineer 69:56.
    Obituary, Engineering 49:66–8.
    H.W.Dickinson, 1938, A Short History of the Steam Engine, Cambridge University Press (provides an illustration of Adamson's flanged seam for boilers).
    R.L.Hills, 1989, Power from Steam. A History of the Stationary Steam Engine, Cambridge University Press (covers the development of the triple-expansion engine).
    RLH

    Biographical history of technology > Adamson, Daniel

  • 15 Kapp, Gisbert Johann Eduard Karl

    SUBJECT AREA: Electricity
    [br]
    b. 2 September 1852 Mauer, Vienna, Austria
    d. 10 August 1922 Birmingham, England
    [br]
    Austrian (naturalized British in 1881) engineer and a pioneer of dynamo design, being particularly associated with the concept of the magnetic circuit.
    [br]
    Kapp entered the Polytechnic School in Zurich in 1869 and gained a mechanical engineering diploma. He became a member of the engineering staff at the Vienna International Exhibition of 1873, and then spent some time in the Austrian navy before entering the service of Gwynne \& Co. of London, where he designed centrifugal pumps and gas exhausters. Kapp resolved to become an electrical engineer after a visit to the Paris Electrical Exhibition of 1881 and in the following year was appointed Manager of the Crompton Co. works at Chelmsford. There he developed and patented the dynamo with compound field winding. Also at that time, with Crompton, he patented electrical measuring instruments with over-saturated electromagnets. He became a naturalized British subject in 1881.
    In 1886 Kapp's most influential paper was published. This described his concept of the magnetic circuit, providing for the first time a sound theoretical basis for dynamo design. The theory was also developed independently by J. Hopkinson. After commencing practice as a consulting engineer in 1884 he carried out design work on dynamos and also electricity-supply and -traction schemes in Germany, Italy, Norway, Russia and Switzerland. From 1891 to 1894 much of his time was spent designing a new generating station in Bristol, officially as Assistant to W.H. Preece. There followed an appointment in Germany as General Secretary of the Verband Deutscher Electrotechniker. For some years he edited the Electrotechnische Zeitschrift and was also a part-time lecturer at the Charlottenberg Technical High School in Berlin. In 1904 Kapp was invited to accept the new Chair of Electrical Engineering at the University of Birmingham, which he occupied until 1919. He was the author of several books on electrical machine and transformer design.
    [br]
    Principal Honours and Distinctions
    Institution of Civil Engineers Telford Medal 1886 and 1888. President, Institution of Electrical Engineers 1909.
    Bibliography
    10 October 1882, with R.E.B.Crompton, British patent no. 4,810; (the compound wound dynamo).
    1886, "Modern continuous current dynamo electric machines and their engines", Proceedings of the Institution of Civil Engineers 83: 123–54.
    Further Reading
    D.G.Tucker, 1989, "A new archive of Gisbert Kapp papers", Proceedings of the Meeting on History of Electrical Engineering, IEE 4/1–4/11 (a transcript of an autobiography for his family).
    D.G.Tucker, 1973, Gisbert Kapp 1852–1922, Birmingham: Birmingham University (includes a bibliography of his most important publications).
    GW

    Biographical history of technology > Kapp, Gisbert Johann Eduard Karl

  • 16 Perry, John

    [br]
    b. 14 February 1850 Garvagh, Co. Londonderry, Ireland (now Northern Ireland)
    d. 4 August 1920 London, England
    [br]
    Irish engineer, mathematician and technical-education pioneer.
    [br]
    Educated at Queens College, Belfast, Perry became Physics Master at Clifton College in 1870 until 1874. This was followed by a brief period of study under Sir William Thomson in Glasgow. He was then appointed Professor of Engineering at the Imperial College of Japan in Tokyo, where he formed a remarkable research partnership with W.E. Ayrton. On his return to England he became Professor of Engineering and Mathematics at City and Guilds College, Finsbury. Perry was the co-inventor with Ayrton of many electrical measuring instruments between 1880 and 1890, including an energy meter incorporating pendulum clocks and the first practicable portable ammeter and voltmeter, the latter being extensively used until superseded by instruments of greater accuracy. An optical indicator for high-speed steam engines was among Perry's many patents. Having made a notable contribution to education, particularly in the teaching of mathematics, he turned his attention in the latter period of his life to the improvement of the gyrostatic compass.
    [br]
    Principal Honours and Distinctions
    FRS 1885. President, Institution of Electrical Engineers 1900. Whitworth Scholar 1870.
    Bibliography
    28 April 1883, jointly with Ayrton, British patent no. 2,156 (portable ammeter and voltmeter).
    1900, England's Neglect of Science, London (for Perry's collected papers on technical education).
    Further Reading
    D.W.Jordan, 1985, "The cry for useless knowledge: education for a new Victorian technology", Proceedings of the Institution of Electrical Engineers 132 (Part A): 587– 601.
    GW

    Biographical history of technology > Perry, John

  • 17 Cubitt, William

    [br]
    b. 1785 Dilham, Norfolk, England
    d. 13 October 1861 Clapham Common, Surrey, England
    [br]
    English civil engineer and contractor.
    [br]
    The son of a miller, he received a rudimentary education in the village school. At an early age he was helping his father in the mill, and in 1800 he was apprenticed to a cabinet maker. After four years he returned to work with his father, but, preferring to leave the parental home, he not long afterwards joined a firm of agricultural-machinery makers in Swanton in Norfolk. There he acquired a reputation for making accurate patterns for the iron caster and demonstrated a talent for mechanical invention, patenting a self-regulating windmill sail in 1807. He then set up on his own as a millwright, but he found he could better himself by joining the engineering works of Ransomes of Ipswich in 1812. He was soon appointed their Chief Engineer, and after nine years he became a partner in the firm until he moved to London in 1826. Around 1818 he invented the treadmill, with the aim of putting prisoners to useful work in grinding corn and other applications. It was rapidly adopted by the principal prisons, more as a means of punishment than an instrument of useful work.
    From 1814 Cubitt had been gaining experience in civil engineering, and upon his removal to London his career in this field began to take off. He was engaged on many canal-building projects, including the Oxford and Liverpool Junction canals. He accomplished some notable dock works, such as the Bute docks at Cardiff, the Middlesborough docks and the coal drops on the river Tees. He improved navigation on the river Severn and compiled valuable reports on a number of other leading rivers.
    The railway construction boom of the 1840s provided him with fresh opportunities. He engineered the South Eastern Railway (SER) with its daringly constructed line below the cliffs between Folkestone and Dover; the railway was completed in 1843, using massive charges of explosive to blast a way through the cliffs. Cubitt was Consulting Engineer to the Great Northern Railway and tried, with less than his usual success, to get the atmospheric system to work on the Croydon Railway.
    When the SER began a steamer service between Folkestone and Boulogne, Cubitt was engaged to improve the port facilities there and went on to act as Consulting Engineer to the Boulogne and Amiens Railway. Other commissions on the European continent included surveying the line between Paris and Lyons, advising the Hanoverian government on the harbour and docks at Hamburg and directing the water-supply works for Berlin.
    Cubitt was actively involved in the erection of the Crystal Palace for the Great Exhibition of 1851; in recognition of this work Queen Victoria knighted him at Windsor Castle on 23 December 1851.
    Cubitt's son Joseph (1811–72) was also a notable civil engineer, with many railway and harbour works to his credit.
    [br]
    Principal Honours and Distinctions
    Knighted 1851. FRS 1830. President, Institution of Civil Engineers 1850 and 1851.
    Further Reading
    LRD

    Biographical history of technology > Cubitt, William

  • 18 Beyer, Charles Frederick

    [br]
    b. 14 May 1813 Plauen, Saxony, Germany
    d. 2 June 1876 Llantysilio, Denbighshire, Wales
    [br]
    German (naturalized British in 1852) engineer, founder of locomotive builders Beyer, Peacock \& Co.
    [br]
    Beyer came from a family of poor weavers, but showed talent as an artist and draftsman and was educated at Dresden Polytechnic School. He was sent to England in 1834 to report on improvements in cotton spinning machinery and settled in Manchester, working for the machinery manufacturers Sharp Roberts \& Co., initially as a draftsman. When the firm started to build locomotives he moved to this side of the business. The Institution of Mechanical Engineers was founded at his house in 1847. In 1853 Beyer entered into a partnership with Richard Peacock, Locomotive Engineer to the Manchester, Sheffield \& Lincolnshire Railway, and Henry Robertson to establish Beyer, Peacock \& Co. The company soon established a reputation for soundly designed, elegant locomotives: it exported worldwide, and survived until the 1960s.
    [br]
    Further Reading
    Obituary, 1877, Minutes of Proceedings of the Institution of Civil Engineers 47. R.L.Hills, 1967–8 "Some contributions to locomotive development by Beyer, Peacock \& Co.", Transactions of the Newcomen Society 40 (a good description of Beyer, Peacock \& Co's locomotive work).
    PJGR

    Biographical history of technology > Beyer, Charles Frederick

  • 19 Hodgkinson, Eaton

    [br]
    b. 26 February 1789 Anderton, Cheshire, England
    d. 18 June 1861 near Manchester, England
    [br]
    English engineer who devised d new form of cast-iron girder.
    [br]
    Eaton Hodgkinson's father, a farmer, died when he was 6 years old, but his mother was a resourceful woman who set up a business in Salford and ensured that her son received a sound schooling. Most important for his education, however, was his friendship with the Manchester scientific luminary Dr. Dalton, who instructed him in practical mathematics. These studies led Hodgkinson to devise a new form of cast-iron girder, carefully tested by experiments and which was widely adopted for fire-proof structures in the nineteenth century. Following Dalton, Hodgkinson became an active member of the Manchester Philosophical Society, of which he was elected President in 1848. He also became an active member of the British Association for the Advancement of Science. Hodgkinson's work on cast-iron girders secured him a Fellowship of the Royal Society, and the Royal Medal of the Society, in 1841. It was Hodgkinson also who verified the mathematical value of the pioneering experiments carried out by William Fairbairn for Robert Stephenson's proposed wrought-iron tube structure which, in 1849, became the Britannia Bridge over the Menai Straits. He received a Silver Medal for this work at the Paris Exhibition of 1858. Hodgkinson served as a member of the Royal Commission appointed to enquire into the application of iron to railway structures. In 1847 he was appointed Professor of the Mechanical Principles of Engineering at University College, London, but his health began to fail shortly after. He was elected an Honorary Member of the Institution of Civil Engineers in 1851. Described as "singularly simple and guileless", he was widely admired and respected.
    [br]
    Principal Honours and Distinctions
    President, Manchester Philosophical Society 1848. FRS 1841. Royal Society Medal 1841.
    Further Reading
    Dictionary of National Biography, London.
    Proceedings of the Institution of Civil Engineers 21:542–5.
    AB

    Biographical history of technology > Hodgkinson, Eaton

  • 20 Shortt, William Hamilton

    SUBJECT AREA: Horology
    [br]
    b. 28 September 1881
    d. 4 February 1971
    [br]
    British railway engineer and amateur horologist who designed the first successful free-pendulum clock.
    [br]
    Shortt entered the Engineering Department of the London and South Western Railway as an engineering cadet in 1902, remaining with the company and its successors until he retired in 1946. He became interested in precision horology in 1908, when he designed an instrument for recording the speed of trains; this led to a long and fruitful collaboration with Frank HopeJones, the proprietor of the Synchronome Company. This association culminated in the installation of a free-pendulum clock, with an accuracy of the order of one second per year, at Edinburgh Observatory in 1921. The clock's performance was far better than that of existing clocks, such as the Riefler, and a slightly modified version was produced commercially by the Synchronome Company. These clocks provided the time standard at Greenwich and many other observatories and scientific institutions across the world until they were supplanted by the quartz clock.
    The period of a pendulum is constant if it swings freely with a constant amplitude in a vacuum. However, this ideal state cannot be achieved in a clock because the pendulum must be impulsed to maintain its amplitude and the swings have to be counted to indicate time. The free-pendulum clock is an attempt to approach this ideal as closely as possible. In 1898 R.J. Rudd used a slave clock, synchronized with a free pendulum, to time the impulses delivered to the free pendulum. This clock was not successful, but it provided the inspiration for Shortt's clock, which operates on the same principle. The Shortt clock used a standard Synchronome electric clock as the slave, and its pendulum was kept in step with the free pendulum by means of the "hit and miss" synchronizer that Shortt had patented in 1921. This allowed the pendulum to swing freely (in a vacuum), apart from the fraction of a second in which it received an impulse each half-minute.
    [br]
    Principal Honours and Distinctions
    Master of the Clockmakers' Company 1950. British Horological Society Gold Medal 1931. Clockmakers' Company Tompion Medal 1954. Franklin Institute John Price Wetherill Silver Medal.
    Bibliography
    1929, "Some experimental mechanisms, mechanical and otherwise, for the maintenance of vibration of a pendulum", Horological Journal 71:224–5.
    Further Reading
    F.Hope-Jones, 1949, Electrical Timekeeping, 2nd edn, London (a detailed but not entirely impartial account of the development of the free-pendulum clock).
    DV

    Biographical history of technology > Shortt, William Hamilton

Страницы
  • 1
  • 2

См. также в других словарях:

  • Institution of Mechanical Engineers — Founder George Stephenson Professional title Chartered Mechanical Engineer Founded 27 January 1847 (1847 01 27) …   Wikipedia

  • Institution of Civil Engineers — Type Civil engineering Professional title Chartered Civil Engineer Founded 2 January 1818 (1818 01 02) …   Wikipedia

  • North of England Institute of Mining and Mechanical Engineers — The North of England Institute of Mining and Mechanical Engineers (NEIMME) is a British institution[clarification needed] dedicated to the research and preservation of knowledge relating to mining and mechanical engineering. Founded in 1852, the… …   Wikipedia

  • Model in the Loop — (MIL) ist die Simulation eines eingebetteten Systems in einer frühen Entwicklungsphase, der Modellierung, bei der modellbasierten Softwareentwicklung. Eingebettete Systeme kommunizieren mit ihrer Umwelt und erwarten häufig plausible Sensorsignale …   Deutsch Wikipedia

  • Institution of Engineering and Technology — Infobox Non profit Non profit name = Institution of Engineering and Technology Non profit Non profit type = Professional Organization founded date = 1871 [Engineering Council UK. [http://www.engc.org.uk/institutions/institutions.aspx ECUK… …   Wikipedia

  • Bookseller/Diagram Prize for Oddest Title of the Year — The Bookseller/Diagram Prize for Oddest Book Title of the Year The logo for the Diagram Prize. Awarded for Oddest book title Country United Kingdom …   Wikipedia

  • Bookseller/Diagram Prize for Oddest Title of the Year — Bookseller/Diagram Prize Le Bookseller/Diagram Prize for Oddest Title of the Year est un prix littéraire récompensant les titres de livres les plus mauvais. Depuis 1978, le prix de Bookseller/Diagram, du Bookseller magazine avec le patronage du… …   Wikipédia en Français

  • Churchill Machine Tool Company — The Churchill Machine Tool Company Limited Type Machine Tool Manufacturer Industry Engineering Fate Taken over, liquidated …   Wikipedia

  • City of Nottingham Water Department — The City of Nottingham Water Department (1912–1974), formerly the Nottingham Corporation Water Department (1880–1912), was responsible for the supply of water to Nottingham from 1880 to 1974.[1] Contents 1 Early History 1696–1880 1.1 Original… …   Wikipedia

  • Science in the Age of Enlightenment — The scientific history of the Age of Enlightenment traces developments in science and technology during the Age of Reason, when Enlightenment ideas and ideals were being disseminated across Europe and North America. Generally, the period spans… …   Wikipedia

  • Военные периодические издания — ВОЕННЫЯ ПЕРІОДИЧЕСКІЯ ИЗДАНІЯ. (По даннымъ 1911 г.) Русскія. Офиціальныя изданія: Приказы по воен. вѣдомству и Циркуляры гл. штаба ; Сб. прик. и цирк. о личн. составѣ чиновъ мор. вѣдомства (изд. гл. морск. шт.) съ прилож. списка личн. состава… …   Военная энциклопедия

Поделиться ссылкой на выделенное

Прямая ссылка:
… Нажмите правой клавишей мыши и выберите «Копировать ссылку»